[ Home Page ]    [ History ]    [ The Project ]

Project Log:  Summary of Phase II
 
LABOR: 11/8/10 - 2/20/11 209 Hours
   
MATERIALS  
1/2 x 2 brass pipe nipple 4
1/2" bronze plug 6
1/2" brass close nipple 2
1/2" bronze shutoff valve 6
1/4" bronze lock washers 8
1/4" bronze nuts 8
1/4" bronze washers 8
Cutless bearing "BIND" 1.25 x 1.5 x 5 1
Packing box hose 2-1/2" 1
Garboard drain fitting, bronze 1
U-Bolts, caprail, SS 12
#14 x 1-1/4 SS screw, FH 2
#14 x 3  bronze screws 10
1/4-20 x 3 FHMS, bronze 8
8 x 1" bronze screws, box 1
8 x 1-1/2 bronze screws, box 0.5
8x 1-1/4 bronze screw, box 2
3/8 flange locking nuts, SS (10/pk) 3
316 SS deckplate, 4" 4
316 SS fender washers, 3/8 x 1, box 1
120 grit 2" PSA strip, ft 25
120 grit 5" PSA disc, ea 47
120 grit 6" Hook-Loop disc, ea 23
80 grit 4" PSA strip, ft 28.5
80 grit 5" PSA disc, ea 183
80 grit 6" Hook-Loop disc, ea 46
220 grit 4" PSA strip, ft 3.5
320 grit 2" PSA strip 6
36 grit 2" PSA disc, ea 2
40 grit 5" PSA disc, ea 62
4-1/2" angle flap wheel, 36 grit 1
2-part foam, expanding, gal kit 1
2-part foam, expanding, qt kit 1
4" biaxial tabbing, ft 12
6" biaxial tabbing, ft 103
1708 Biax cloth, 38" width, yard 3
Epoxy resin, mixed oz. (resin and hardener) 596
Pro-Set cartridge 2.5
Pro-Set mixing tip 3
Scotch-Brite pad 5
West system foam roller, 7" 1
G-10, 3/4", sq in 30
Cabosil, qt 10
Alexseal fine filler, oz. 4
Captain's Varnish, qt 1
Life-Calk Teak, tube 8
Livorsi fuel tank senders AFLS 240/33 ohm 3
Mahogany, 4/4, BF 7.34
Meranti plywood sheet, 12mm 2
Meranti plywood sheet, 18mm  2
Nitrile gloves, box 1
Water Tanks, Custom 3
Fuel Tanks, Custom 3
 
 

< Previous | Next >


The Motorsailer Project
Site design and content ©2010-2015 by Timothy C. Lackey.  All rights reserved.

Please notify me of broken or missing links or other site issues.
You can always find every day's project log links on The Project page.

Questions and comments | Home Page
V1.0 went live on 8/26/10