Project Log: Tuesday, January 17, 2012
Wanting to put the work on the new foundations behind
me, I spent about an hour first washing and sanding the
new fiberglass, then cleaning up, removing plastic, and
getting the boat back to normal. |
 |
Afterwards, I set up the engine template and string once
more to check the final version of the engine
foundations. The aft mounts would need to be
adjusted slightly downward, as expected (I didn't lower
them now since the adjusting nuts were up against the
two spacers I'd installed at the beginning of the
process), but generally speaking the new foundations had
ended up right where they needed to, and where I'd
anticipated. |
|
Total Time Today: 1 hour
|
<
Previous |
Next > |
|
|
